Move to the text
UNITEK JAPAN K.K.
[Osaka Head Office]
〒563-0025
2-7-6, Jyonan, Ikeda-city, Osaka
Kanda second building
TEL. +81-727-54-5757
FAX. +81-727-54-5758

[Yokohama Office]
〒222-0033
2-12-12 Shin-Yokohama Kohoku-ku Yokohama-City, Kanagawa Shin-Yokohama IK building
TEL. +81-454-70-0177
FAX. +81-454-70-0178
We are a import company of industrial equipment handling the measuring devices used for extruders for electric wire production and its peripheral devices, plastic products in general and cleaning machine, surface treatment machine and we can suggest a solution from various angles.

Sablux company sole agent

Sablux society company introduction

Sablux based in Switzerland is a well-established blast manufacturer proud of the history more than 60 years from founding.It caught the needs of the customer precisely and It applied conventional sand blasting and worked on the development of various blast devices.
 
For example, it has unique devices such as a cleaning machine that removes dirt adhering to screws and molds, a surface treatment machine that can polish precise metals and dies, etc. It responds to customer's needs, propose equipments that can satisfy.

UNICLEAN

What is UNICLEAN
Using blast agent made of plastic, It removes the resin stain which attached to a screw and a die.
 
Characteristic
☆It uses blast agent made of plastic
It does not give damage to metal by using plastic blast agent.
☆It washes resin at normal temperature
Since it is washed at nomal temperature without adding any heat, it does not damage the workpiece and does not generate gas or the like.
☆It realizes washing of every resin
It can facilitate the washing of the resin of the very difficult super engineering plastics by hand.
☆Shortening of the washing time
Ability for washing is very high and can wash it predominantly in comparison with cleaning by the manual labor in a short time.
☆Vacuum mechanism
A system of the vacuum works in a cabin and prevents scattering of the mine dust.
☆Recycling of the blast agent
There is a recovery mechanism in the device, and since the reusable blasting agent is recovered, consumption of blasting agent can be suppressed.
☆Dust collector, a separator are built-in
Dust collector and a separator are carried in a device and become built-in and are a compact design.
☆Upgrading to a screw device to automatically wash
The upgrading from standard UNICLEAN to the screw automaton which can wash a screw in operator-free is possible(only in UCL-95, possible)
 
 

Cleaning example with Uniclean and video

UNIFINISH

What is UNIFINISH
It is a surface reforming technology which densifies the surface condition of metal by unique two step ultra low pressure blast called micro finish treatment.
*Microfinish processing refers to the processing performed by blasting equipment 'unifinishing' equipment.
 
Characteristic
☆Die polishing
It removes an electric discharge, cutting, the surface hardening layer after polishing it neatly and can polish it closely. In addition, It can dissolve the uneven plishment by the worker.
☆Shortening of the polishing time
It is made minute in comparison with normal hand polishing in a short time.
☆Deflashing
Processing mark can remove made small Bali. By an urtra-low air pressure blast, It can minimize edge sag.
☆Surface densification
In resin molding, it smooths unevenness of the metal surface part through which resin flows, improving releasability and slipperiness.
☆Recycle blasting agent
There is a recovery mechanism in the device, and since the reusable blasting agent is recovered, consumption of blasting agent can be suppressed.
☆Integrated dust collector and separator
The dust collector and the separator are mounted in the equipment and it is an integrated type, it is compact design.

Microfinish processing example

MINICLEAN / FINISH

What is MINICLEAN / FINISH
It is a desk top device in which UniClean and Unifinish technologies are gathered in one unit.
 
Characteristic
☆Resin cleaning and micro finish processing gather one unit
Depending on the number of blast tanks, Multiple processing can be done with one unit.
☆Ultra low pressure blast
Extremely low pressure blasting from 0.03 MPa is possible
☆Extra-fine nozzle
It uses an ultrafine nozzle with a minimum diameter of 0.4 mm, making it ideal for precision electronic parts and small workpieces of connector molds.
☆Desktop type
It is very compact design and space saving.
 

X coat

What is X coat
It is a chemical electric coating which is excellent in abrasion resistance and improves sliding characteristics and releasability.
 
Characteristic / use
Screw / dice / parts in contact with high pressure resin etc
・Ultra thin (3 ~ 15μm) chemical and electrical coating (film thickness can be adjusted) Hardness 1800 Hv
・Hardness 1800Hv
・Coating that does not discolor ・ discoloration
・Excellent abrasion resistance ・ corrosion resistance
・Processing temperature is about 60 ~ 75 ℃
・Heat resistance -200 ℃ ~ + 1000 ℃
 
Effect
・Reduce cleaning time by 50 to 80%
・Improvement of screw mixing effect
・Reduction in resin saving and reduction in resin quality deterioration
・Reduction of mold contamination
・Reduce pressure loss,stable temperature and pressure of molten resin
・Improvement of surface condition of molded parts

Example treatment of X coat

Back to TOP