News
- UNICLEAN (screw, die washing blast device)
It is blast Cleaning machine specialized in the washing of a screw, the die.
It is the device which I can wash without giving a screw, the base material of the die damage by using blast agent of the thermosetting resin.
- UNIFINISH (metal surface processing blast device)
It is the blast device which can plan die polishing, Bali collecting, surface minute mold release characteristics, fluid improvement.
I can make the metal surface minute as a blast processes the metal surface using alumina, two kinds of blast agent of glass beads.
Adjusting it from urtra-low air pressure (0.03MPa) is possible and can handle corner anyone, dimensions change regardless of the technology of the worker in spite of being a guard besides.
I will introduce the reduction of working hours results of the die polishing in UNIFINISH this time.
A polishing object: Die for injection molding it
A manufactured item: Plastic screw
Die materials: SKD
One molding department of the screw production die was put on the customer of this matter by hand polishing for about two hours, but I polished it with microfinish processing by the UNIFINISH for about three minutes and was able to shorten time. (polishing time, about 1/40)
It was difficult by the hand polishing the hem part of the salient (thread) of the molding department and seemed to be had a hard time, but of the UNIFINISH blow
As the media is number of the particle size ... number 10μm, a complicated point and a complicated shape do not have any problem and can put processing.
Furthermore, sliding improves by processing the surface by a 1μm unit into a pear place (wrinkle) form and can expect the improvement of the mold release characteristics, too.
As come on a demonstration test free in us the first time, at die polishing time shortening, the improvement of the die in mold release characteristics, electric discharge eyes
If improvement of the processing mark removal such as wire cut eyes is examined, I would appreciate your trying it by all means.
In addition, about the customer who cannot visit an office under the influence of new coronavirus now,
As the remote (Web correspondence: Skype, GoogleMeet, Teams) goes, please feel free to contact me.
I would appreciate your asking it to the following contact information if you have any questions.
〒563-0025 2-7-6, Jonan, Ikeda-shi, Osaka Kanda second building
TEL: +81-727-54-5757 FAX: +81-727-54-5758
〒222-0033 2-12-12, Shinyokohama, Kouhoku-ku, Yokohama-shi, Kanagawa
TEL: +81-454-70-0177 FAX: +81-454-70-0178