I import and sell products such as Ikeda-shi, Osaka UNITEK JAPAN K.K. fixed centered crossheads In-line measuring system, the Cleaning machine.

The Laser Diameter & Dimension Measuring Gauges which I can measure to a product of a maximum of 1,200 degrees Celsius. It is rigid, and, to demand specifications, there are yudoshiki, rotary three types. It is rotary and transfers electricity, measurement data by radio and realizes easy maintenance. It is the Measuring device which is plurally introduced into the major steelmaker.

The heteromorphic dimensions measuring machine which adopted "a light cutting method." I catch an outline with a CCD camera and, let alone dimensions, can measure R corner or the distance between two points. In addition, it is one of the strengths that can easily edit a recipe in customers by reading DXF file.

In the cold process of manufacture, it is a machine measuring the curve of the circle stick. The measurement in 3 axes becomes the standard specifications, but by increasing the number of the axes to 5 axes, can measure the both ends curve, too. I can measure a circle dash to Φ 15mm - Φ 280mm.

The Measuring device which is cold, and measures the dimensions (length, height of the side) of the heteromorphic product. By yudokikamae, a triangle, a quadrangle, the hexagonal measurement are possible. Because the footstool is bundled with compact specifications, I can incorporate it in the production line easily.

In the cold heteromorphic product production line, it is a measuring machine measuring dimensions for the cause by the outline data of the product. The product of Φ 23mm - 160mm is targeted for the measurement. Setting and the maintenance that are easy by a very compact body design are possible.

The outer diameter measurement is possible Measuring device under just after the rolling and the severe environment just after the drawing. If it is cold, and not only I incorporate it in both production lines between the heat and can measure, but also there is the gap that a laser goes through, what I can measure features it. The measuring field has 160mm, 310mm, three setting of 550mm.

The defect (irregularities) detector of the product surface. It is detectable with defects (longer direction) 0.25mm at the minimum or more. The measurement field has a lineup of two kinds of 13mm and 33mm, and the detection accuracy is proud of ±0.008mm with a product of measuring field 13mm. The number of the measurement axes is up to three axes, but I put two together and am measurable in 6 axes.