Move to the text

The Sale of the IN sensor is | UNITEK JAPAN K.K.

We deal mainly devices used for extruders
for electric wire production and its
peripheral devices, plastic and steel market.
[Osaka Head Office] 　072-754-5757
[Yokohama Office] 045-470-0177
UNITEK JAPAN K.K.
[Osaka Head Office]
〒563-0025
2-7-6, Jyonan, Ikeda-city, Osaka
Kanda second building
TEL. +81-727-54-5757
FAX. +81-727-54-5758
[Yokohama Office]
〒222-0033
2-12-12 Shin-Yokohama Kohoku-ku Yokohama-City, Kanagawa Shin-Yokohama IK building
TEL. +81-454-70-0177
FAX. +81-454-70-0178
We are a import company of industrial equipment handling the measuring devices used for extruders for electric wire production and its peripheral devices, plastic products in general and cleaning machine, surface treatment machine and we can suggest a solution from various angles.

IN sensor

　◆Main features　

  • Measurements up to 4000bar nozzle pressure and melttemperature of 400°C.
  • Multishot measurements at temperatures <230°C with different levels of pressure.
  • Simple magnetic installation without screws.
  • Combine the IN Sensor together with the Nozzle touch force sensor.
  • Ideal for service and development (measurements during operation are not possible).



　Multi-shot　

The tip of the IN can be heated with a heater band (maximum temperature 230 °C) to measure various pressures (up to 4000 bar).
In this way, the plastic injected into the dead volume remains liquid.
You can choose from 500, 1000, 1500, and 2000 bar steps.


　Single-shot　

If the resin temperature exceeds 230 °C (up to 400 °C), the pressure can still be measured in 1 shot.
The remaining coagulated plastic inside the sensor must be removed from each shot.
　Mounting with a magnet　

Thanks to a magnetic base, the installation is easy very fast.
This allows the nozzle check to be attached to the mold.
A washing object: One gear pump part
Adhesion resin: Olefin-based resin
Washing time: Manual labor three hours → About ten minutes (I shorten it to 1/18 at washing time!)
I will introduce the reduction of working hours results of the resin washing of the verge using the UNICLEAN this time.
Technical data
Strain gauge type
Foil
Measuring range
4,000 bar
Maximum touch force
300kN (@ 60 mm diameter)
Sensitivity
1.5 mV/V (nominal)
Accuracy error
<±0.5% FS
Linearity Error
<0.2% FS
Repeatability Error
<0.2% FS
Operating temperatur range
10°...+230°C ( up to 400°C with singleshot application)
Storage temperature range
-20°...+70°C
Protection class
IP50
Case material
Stainless steel (high-grade)
Back to TOP