Move to the text
UNITEK JAPAN K.K.
[Osaka Head Office]
〒563-0025
2-7-6, Jyonan, Ikeda-city, Osaka
Kanda second building
TEL. +81-727-54-5757
FAX. +81-727-54-5758

[Yokohama Office]
〒222-0033
2-12-12 Shin-Yokohama Kohoku-ku Yokohama-City, Kanagawa Shin-Yokohama IK building
TEL. +81-454-70-0177
FAX. +81-454-70-0178
We are a import company of industrial equipment handling the measuring devices used for extruders for electric wire production and its peripheral devices, plastic products in general and cleaning machine, surface treatment machine and we can suggest a solution from various angles.

Smart Control System

Automatic setup outer diameter control system SCS
(Smart Control System)
 

Characteristic

  • SCS largely reduce product loss by a system controlling product outer diameter at the time of start-up and fall-down
     
  • Outer diameter does not do a hunting cap at the time of a setup by the USYS20 original operation, control function which is a function part and can perform stable control by a combination with drive device SCS
     
  • ODAC measuring head is strong in agitation such as heat, smoke, mine dust, the plein air, and this head is best for just under extrusion for control.
 
 
The product before reaching the steady line speed by controlling outer diameter from a setup stage becomes the quality goods in setup outer diameter control system SCS.
 
Conventionally, outer diameter was not stable until I reached the steady Line speed., and the previous product became the defective article.
 
SCS make reduce defects and shows a big effect to reduce materials loss.
 
 
Back to TOP