Move to the text
As a import company of industrial equipment,
we always introduce the cutting-edge technology
that is reliable to Japan from the world.
As a import company of industrial equipment,
we always introduce the cutting-edge technology
that is reliable to Japan from the world.
As a import company of industrial equipment,
we always introduce the cutting-edge technology
that is reliable to Japan from the world.
UNITEK JAPAN K.K.
[Osaka Head Office]
〒563-0025
2-7-6, Jyonan, Ikeda-city, Osaka
Kanda second building
TEL. +81-727-54-5757
FAX. +81-727-54-5758

[Yokohama Office]
〒222-0033
2-12-12 Shin-Yokohama Kohoku-ku Yokohama-City, Kanagawa Shin-Yokohama IK building
TEL. +81-454-70-0177
FAX. +81-454-70-0178
We are a import company of industrial equipment handling the measuring devices used for extruders for electric wire production and its peripheral devices, plastic products in general and cleaning machine, surface treatment machine and we can suggest a solution from various angles.

News

[Sablux news February issue] Introduction of the resin washing reduction of working hours results of the gear pump
2022-02-15
注目オススメ
Firstly it is ...
The Sablux news delivers it to user having you already use our handling product, the customer whom the product examines for the purpose of providing useful information and to be able to utilize.

I will send the Sablux Corporation product UNICLEAN which is the handling product of our UNITEK JAPAN, the use results of the UNIFINISH in the Sablux news.

  • UNICLEAN (screw, die washing blast device)
    It is blast Cleaning machine specialized in the washing of a screw, the die. It is the device which I can wash without giving a screw, the base material of the die damage by using blast agent of the thermosetting resin.
     
  • UNIFINISH (metal surface processing blast device)
    It is the blast device which can plan die polishing, Bali collecting, surface minute mold release characteristics, fluid improvement.
    I can make the metal surface minute as a blast processes the metal surface using alumina, two kinds of blast agent of glass beads.
    Adjusting it from urtra-low air pressure (0.03MPa) is possible and can handle corner anyone, dimensions change regardless of the technology of the worker in spite of being a guard besides.


◆The results introduction

I will introduce the reduction of working hours results of the resin washing of the verge using the UNICLEAN this time.
 
A washing object: One gear pump part
Adhesion resin: Olefin-based resin
Washing time: Manual labor three hours → About ten minutes (I shorten it to 1/18 at washing time!)


It was considerably had trouble by washing of the olefin-based resin that the customer of this matter attached to gear pump parts by hand with about three hours, but was able to shorten washing time by washing in the UNICLEAN for (about 1/18 washing time) for about ten minutes.
In addition, with another case, there are the results that it was shortened for about four minutes (1/60) by washing of the UNICLEAN that the washing of gear parts took approximately 4 hours by hand.

I handle the UNICLEAN by pressure of 0.3 - 0.4Mpa in a direct pressure type blast device.
100% of media beginning to blow can wash adhesion resin without ability for washing is high and damaging a screw and a die for the washing for resin (thermosetting resin).
In addition, I tested washing of all kinds of resin to date, but washing is easily possible regardless of a type of the resin.
(I can wash the Super engineering plastics such as PEEK, PPS,PA,PC,POM, too)
In a thing using the UNICLEAN, I can wash every resin without outbreak of the gas for washing at a short time and the normal temperature safely.
 
Guidance ... of ... free test
In Osaka showroom, Yokohama showroom, you can let you actually carry out the first gratuitous test using the actual machine with the article of the problem of the customer if I can receive interest from our product at the event mentioned above.
 
In addition, about the customer who cannot visit an office under the influence of coronavirus
As I carry out the remote demonstration of the favorable reception, I would appreciate your trying it casually.
 
I would appreciate your asking it to the following contact information if you have any questions.
[Osaka Head Office]
〒563-0025 2-7-6, Jonan, Ikeda-shi, Osaka Kanda second building
TEL: +81-727-54-5757 FAX: +81-727-54-5758
[Yokohama Office]
〒222-0033 2-12-12, Shinyokohama, Kouhoku-ku, Yokohama-shi, Kanagawa
TEL: +81-454-70-0177 FAX: +81-454-70-0178
[YouTube] You can see ← washing, the surface treatment video in YouTube. 

Official SNS of the UNITEK JAPAN

Back to TOP