I import and sell products such as Ikeda-shi, Osaka UNITEK JAPAN K.K. fixed centered crossheads In-line measuring system, the Cleaning machine.

The Sablux company product which is the handling product of our UNITEK JAPAN in the Sablux news
 

I send the above, UNICLEAN, the use results of the UNIFINISH.

I introduce surface treatment in the UNIFINISH, the improvement results this time.

 

I carried out the alien substance removal such as the aluminum which attached to a sheet metal press type in the case of press working Forming, an adherent reduction test.

The surface of the aluminum is minute and is done by doing microfinish processing when I compare the photograph after the processing before processing and becomes beautiful.

 

Because as a result of having had you test Forming with the model that gave microfinish processing, aluminum adhered to a die when I molded 300, manual labor to scrape off was necessary for a file for about one hour.

I became able to mold 1,000 when I used a die after having given microfinish processing, and adhesion such as the aluminum refuse decreased and became able to easily wipe off the aluminum refuse which attached in a waste.

 

From this, I prevented the adhesion of not only mold release characteristics, the fluidity of the resin but also the aluminum refuse by doing microfinish processing, and the surface was minute in addition and was done, and I became beautiful, and a result to be able to easily drop a dirt appeared.

 

As come on a demonstration test free in us the first time, of the surface treatment if is considered, would appreciate your trying it by all means.

In addition, please feel free to contact me about the customer who cannot visit an office under the influence of a corona now as the remote (Web correspondence: Skype, GoogleMeet, Teams) goes.

 

I would appreciate your asking it to the following contact information if you have any questions.