Intelligent Commercial Cleaning Robot CC1
This single unit combines a variety of functions: sweeping, floor cleaning, vacuuming, and dry wiping.
One robot can adequately meet all your cleaning needs.
<Two cleaning modes>
One robot can adequately meet all your cleaning needs.
<Two cleaning modes>
(1) Sweeping + vacuuming + dry wiping (dry cleaning)
(2) Floor cleaning (wet cleaning)
The combination of accessories can be customized to meet actual customer needs.
Modular component design: Removing accessories, which used to be a tedious task, is now a hassle-free process.
The combination of accessories can be customized to meet actual customer needs.
Modular component design: Removing accessories, which used to be a tedious task, is now a hassle-free process.
Compatible with various flooring materials
Suitable for a variety of indoor floor materials and hardness levels.
- Hard flooring: Natural stone, terrazzo, marble, floor tiles, epoxy resin, sandstone, artificial stone flooring, etc.
- Soft flooring: Low-pile carpet
It fits perfectly in every corner.
In certain situations, use the side brush to effectively clean the edges (less than 6 cm wide).
Sweep the edges thoroughly to leave no trash behind.
Cleaning resumed position
Sweep the edges thoroughly to leave no trash behind.
Cleaning resumed position
Even if the power supply drops during cleaning, the robot remembers the cleaning progress,
After a full charge, you can resume from the position you were in when you last stopped.
Automatic water supply and automatic charging
After a full charge, you can resume from the position you were in when you last stopped.
Automatic water supply and automatic charging
- Large capacity: 15L fresh water tank, 17L wastewater tank, and dedicated workstation included.
- Automated water supply and drainage at workstations
- No manual work required, peace of mind, labor saving
When the power level drops, the robot will automatically return to its charging station.
Digitalization of cleaning
- Remote control via the app allows you to check the work status at any time.
- Send real-time notifications of cleaning results, including cleaning time and area cleaned.
- Digitalization and visualization of cleaning effectiveness: Collect and summarize the work status of each unit to automatically generate cleaning reports.
| Body dimensions | W663 x D568 x H682mm |
| Body weight | 60kg |
sweeping width | 500 mm |
rubbing width | 400 mm |
water tank capacity | Fresh water tank 15L, wastewater tank 17L |
Charging time | Up to 4 hours |
operating time | Up to 9 hours |
Cleaning efficiency | 700-1000 m²/h |
Operating noise | Less than 70dB |
Ground speed | Max 1.2m/s |
Touch panel | 10.1 inches |
Mapping method | Visual + Laser Positioning |