Powder coating
Using MB Coater, you can achieve the best possible coating results for cables, hoses, and irregularly shaped materials.
With line speeds of up to 1,500 m/min and the ability to apply extremely small amounts of powder, this system has already been successfully implemented in a wide range of applications. A filter cleaning system for powder recovery guarantees a 100% dust-free machine environment.
Advantages
» Electrostatic gun with a maximum voltage of 100kV or more
» Reliable and reproducible adhesion of the powder to the product.
» Very small powder dispensing unit; dispensing rate (approx. 15g/min~)
» Various versions of coating tanks
Example: Accommodates product diameters up to 150mm, or a space-saving design suitable for limited installation conditions in extrusion lines, with a width of only 240mm.
» The powder tank can be adjusted in height without tools, quickly adapting to the center height of the product.
» Machine operation via a 7-inch operator panel
» Suitable for use in all industrial systems.
» The manual filling device is for dust-free filling of machines in operation.
» The automatic replenishment cart fills the machine directly from the powder bags.
Technical data (excerpt)
powder coater | |
Maximum product speed | 1,500m/min |
Minimum powder flow rate | Add in small amounts at a minimum rate of 15g/min. |
Maximum powder flow rate | 400g/minute per powder injector |
Types of powder coating | Pneumatic/Electrostatic type |
Power connection | Electrical 1.0kW / Air pressure 6 bar |
Air consumption | 200L/min minimum basic consumption 125 L/min per powder injector |
Dimensions (Length x Height x Width) | 850 x 1800 x 1450 mm |
Options: User management, recipe management, Interface (e.g., ProfiNet) | - |