Process control system Digiforce
Process control system for production processes
◆Features
- X/Y monitoring of up to 3 active channels
- High measurement accuracy of 0.05% FS at a 10 kHz sampling rate.
- Evaluation results within a few milliseconds
- Specifications selectable from PROFINET, PROFIBUS, EtherCAT, EtherNet/IP, and PLC I/O.
- Graphical evaluation such as envelope-shaped, window-shaped, trapezoidal, and functional evaluations based on set thresholds.
- X/Y monitoring of up to 3 active channels
- High measurement accuracy of 0.05% FS at a 10 kHz sampling rate.
- Evaluation results within a few milliseconds
- Specifications selectable from PROFINET, PROFIBUS, EtherCAT, EtherNet/IP, and PLC I/O.
- Graphical evaluation such as envelope-shaped, window-shaped, trapezoidal, and functional evaluations based on set thresholds.
◆ Flexible specification options depending on the product
- Flexible integration into customer-specific process environments
- Simple setup technique for the measurement sensor and this device: Bullster TEDS
- All-around functionality for quality assurance
- Supports all major sensor types
- Over 25 years of experience in equipment for X/Y axis processing and quality assurance.
DigiForce 9307
It displays a torque curve including signal testing, leak detection, and resistance measurement from two sensors.
**Features**
◆The factor window and threshold are determined based on the values from the two sensors.
The system determines the shape of the trapezoid and whether the envelope is inside or outside, and then uses mathematical operations to monitor the production process.
◆High precision of 0.05%, high-speed sampling rate of 10 kHz
◆Flexible process integration via Profibus communication interface
◆ Simultaneous monitoring of two synchronization processes
◆High-speed evaluation and data transfer for fluctuation measurements
◆Standard Ethernet, USB, RS232
◆Up to 128 measurement programs are possible.
◆Settings can be changed on the monitor.
◆Original software for recording process data logging
DigiControl PC Software
◆The factor window and threshold are determined based on the values from the two sensors.
The system determines the shape of the trapezoid and whether the envelope is inside or outside, and then uses mathematical operations to monitor the production process.
◆High precision of 0.05%, high-speed sampling rate of 10 kHz
◆Flexible process integration via Profibus communication interface
◆ Simultaneous monitoring of two synchronization processes
◆High-speed evaluation and data transfer for fluctuation measurements
◆Standard Ethernet, USB, RS232
◆Up to 128 measurement programs are possible.
◆Settings can be changed on the monitor.
◆Original software for recording process data logging
DigiControl PC Software