Torque sensor
Non-rotating and rotary torque sensors
◆Features
- Measurement range: 0 ... 0.01 Nm to 0 ... 5000 Nm
- Nonlinearity 0.05% FS or less
- Angular displacement and rotational speed can be measured via optional selection.
- Internal amplification section enables various output signals or interfaces
- Dual range measurement is possible.
- High load resistance due to support bearings
◆ Flexible specification options depending on the product
- Wide variety
- Provided with a short lead time through a modular system
- Manufacturer calibration laboratory accredited to ISO 17025 (DAkkS)
- The "Burster-TEDS" sensor internal chip technology enables easy sensor configuration in Burster electronic devices.
- Accessories are also suggested.
High-precision torque sensor 8661
The 8661 torque sensor is a sensor that accurately measures static and dynamic torque values in both clockwise and counterclockwise rotations.
Non-contact transmission of excitation voltage and measurement signals enables sensor maintenance and fail-safe operation.
As an application, it is suitable for monitoring and measuring tightening torque, torque retention, and torque release in industrial production and assembly.
**Features**
◆Measurement range: 0 ... ± 0.02 Nm to 0 ... ± 1000 Nm
◆High linearity ± 0.05% FS
◆Display operating status
◆16-bit D/A conversion
◆Output signal 0 ... ±10 V (Optional 0 ... ±5 V)
◆Angle measurement 1024 Increment/0.088° (Optional)
◆Includes original software (Optional: Connects to a USB-type torque sensor)
◆From 500 Nm with 4 keyways (other ranges available as an option)
◆Measurement range: 0 ... ± 0.02 Nm to 0 ... ± 1000 Nm
◆High linearity ± 0.05% FS
◆Display operating status
◆16-bit D/A conversion
◆Output signal 0 ... ±10 V (Optional 0 ... ±5 V)
◆Angle measurement 1024 Increment/0.088° (Optional)
◆Includes original software (Optional: Connects to a USB-type torque sensor)
◆From 500 Nm with 4 keyways (other ranges available as an option)