Profile Master Hot/Cold Measuring Machine for Dimensional Measurement (Round, Shaped, and Deformed Steel)
Using the light sectioning method, it can measure a wide range of dimensions, angles, distances between two points, etc. Even for complex products, contours are captured and measured using up to eight cameras. |
The ProfileMaster is a hot/cold dimensional measuring machine that employs an optical cutting method to measure not only the dimensions of a product but also angles and the distance between two points. With optional software, it is also designed to detect scratches and surface defects. This model is widely used not only in Europe but also among structural and deformed steel manufacturers worldwide.
Another strength is that customers can import DXF files and quickly start measurements. Its user-friendly interface and Japanese language display contribute to improving the productivity of Japanese manufacturers.
Another strength is that customers can import DXF files and quickly start measurements. Its user-friendly interface and Japanese language display contribute to improving the productivity of Japanese manufacturers.
Product lineup and specifications
Covers a wide range of product sizes / Measurement area can be selected to match the size.
- Light cutting method
- The measurement range is available up to 800mm.
- Number of measurement axes can be selected to match the product shape.
| Type | Maximum number of axes | measurement area |
| SPS50 | 8 | 50 mm |
| SPS80 | 8 | 80 mm |
| SPS100 | 8 | 100 mm |
| SPS150 | 8 | 150 mm |
| SPS200 | 8 | 200 mm |
| SPS400 | 8 | 400 mm |
| SPS550 | 8 | 550 mm |
| SPS800 | 8 | 800 mm |
*Hot-fuel specifications are only available for SPS200 and above.
Easy to see! Easy to use! HMI
- The touchscreen display allows for intuitive operation!
- The display can be switched to Japanese!
- Numerical data and graphs are displayed side-by-side. Display items can be freely customized!
You can view the measurement screen display in detail using the simulator. Please feel free to contact us.
Measurement and surface defect detection (scratch detection) of deformed steel bars (reinforcement bars) are also possible. *Optional
Measurement of deformed steel bars (reinforcement bars)
By installing optional software, it is possible to measure the dimensions of deformed bars (reinforcement bars) both hot and cold. The main dimensions that can be measured are as follows:
Surface defect detection (SFD)
By installing optional software (SFD), it is possible to detect defects on the product surface.
The size of the defects that can be detected is as follows:
[Target product shape and detectable defect size/examples]
product shape | Detectable minimum defect size |
| Rectangle/corner R | 0.5 mm |
| Round shape | 0.3 mm |
*Please note that SFD (Screen Function Diode) has limitations regarding defect detection based on product shape, linear velocity, surface condition, etc. Please contact us for details.